3-point Hitch
 Our 3-Point Hitch is designed to fit your tractor without having to weld onto or modify your tractor. We build our 3-Point Hitches for heavy-duty work, yet not bulky or awkward looking. Each unit is designed to look like it was factory built for the tractor on which it is installed. Linkage parts are pre-cast for a more professional look and added strength.
Our 3-Point Hitches consist of a bracket that bolts into existing holes in your tractor for mounting. The 3-Point Hitch frame has a rock-shaft on which we mount the upper-lift arms.
Two lower-lifting arms are pinned to the bottom of the mounting frame. Two hydraulic cylinders (one on each side) are fastened to the bottom of the 3-Point Hitch frame and to the upper-lift arms. Two leveling-arms are attached between the upper-lifting arms and the lower lifting arms. The draw bar stays pinned to the tractor and runs through the bottom bracket (like a row crop tractor) for side-sway adjustment.
To operate the 3-Point Hitch, simply plug the hydraulic hose from the hydraulic cylinders to the hydraulic outlets on your tractor.
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
Cat. #4
|
|
Cat. #3
|
|
Cat. #3
|
|
Cat. #3
|
Cat. #3
|
Cat. #3
|
|
Front Mount
|
Cat. #3
| | | |
|